Sobitex Corner Protectors

Protective Pads (“DF”) can be used wherever there are sharp edges to be protected or where damage to lifting materials needs to be prevented. The protective plates are applied during the load fastening / lashing operation. The lashing belt is threaded through the two openings, so that the plate can slide freely along the belt. During the lashing process the belt can thus slide over the plate, avoiding damage with no contact between the belt and sharp edges. The minimum thickness “d” recommended to afford good cut protection is 4mm.

For more info please call 0161 929 6188

Download Spec

Description

Protective Pads (“DF”) can be used wherever there are sharp edges to be protected or where damage to lifting materials needs to be prevented. The protective plates are applied during the load fastening / lashing operation. The lashing belt is threaded through the two openings, so that the plate can slide freely along the belt. During the lashing process the belt can thus slide over the plate, avoiding damage with no contact between the belt and sharp edges. The minimum thickness “d” recommended to afford good cut protection is 4mm.

Go to Top